All PostsMay 2020April 2020March 2020February 2020January 2020October 2019September 2019July 2019March 2019February 2019October 2018September 2018August 2018July 2018June 2018March 2018February 2018January 2018December 2017November 2017July 2017June 2017April 2017February 2017January 2017August 2016July 2016June 2016February 2016November 2015October 2015September 2015July 2015June 2015January 2015November 2014October 2014September 2014August 2014July 2014June 2014May 2014April 2014February 2014January 2014October 2013September 2013July 2013October 2012September 2012May 2012February 2011January 2011December 2010October 2010April 2010January 2010December 2009September 2009February 2009
Congratulation, you just purchased an ID card printer. Unboxed it, put it on your desk, plug the power supply and the USB cable from the printer to your computer. Some more advanced users may have used the Ethernet port on the printer, if available. But now what? Here's what I've been explaining to our customers for nearly two decades. These are good starting points to make sure you use your printer correctly and keep it running for years to come. Now that your printer is connected to your computer, you need to install the Driver for your computer to recognized it and allow you to print. You can use the CD-ROM that was in the box, but the best is to visit your printer manufacturers website and download the latest version of the driver. That way, you will be UpToDate with all the new features and security patches available.
The first thing to understand is that as far your computer is concerned, an ID card printer is just a regular printer, like any ink-jet or laser jet printer. Your computer can't tell the difference between them. You can open any software in your computer and print to your ID card printer. For your computer, the only difference is the output dimensions. The plastic ID card (or CR80 format) dimensions are 3.375" x 2.125" (85.6 mm x 54 mm) and that's how your computer sees the output. It will print whatever you send to the printer in that format.
We put another Post that explains why it is better to use special ID card software if you want to be able to use all the features of your printer, so we won't talk about software here.
It's very easy to replace the print head but it's the most expensive part, so be careful. Over the years, we have two ways that people usually damage the print head.
When printing ID cards, if you notice a long white line going across the design, which means your print head is either damaged or very dirty. First, clean the printer/print head properly and try again. If you still see white lines, you need to contact us for more information.
Your ID card ribbon provides the ink for your printer, but it doesn't work like an ink-jet or laser jet cartridge. The ribbons come with a dispenser (that holds the rolls) or just the rolls. Around the rolls, you have the ribbon that contains panels of color. The ribbons can be quickly identified depending on the type of panels in the roll. Example: YMCKO (Yellow, Magenta, Cyan, Black and Overlay) ribbon. The Overlay is the transparent panel that covers the whole card and protects the colors. Some ribbons don't have the Overlay which means the colors will disappear quite rapidly.
There are many different ribbons, like KO (Black and Overlay) or YMCKOK (Yellow, Magenta, Cyan, Black, Overlay and Black) for dual-side printers with Black on the second side. For monochrome ribbons like Black or Red, it is just a continuous ribbon of the same color.
You can't save money on ink because your ribbon has a precise number of prints. For example, YMCKO with 250 prints means it has 1250 panels (Yellow, Magenta, Cyan, Black and Overlay – 5 x 250). So, your printer will not print more than 250 cards with this ribbon, even if you print only a little logo on your cards. Panels go around the second roll and when the first roll is empty you must change the ribbon. Since your printer does an edge-to-edge print, take advantage of the printer and print as much as you can. You won't be saving ink by printing less on each card! It doesn't work like that!
Tips: Don't reopen the cover unnecessarily after changing the ribbon. Every time you open and close the cover, the printer will sync the ribbon and you will lose many panels. Open the cover only when the ribbon is empty of you have a card jam. This will save money!
Because it is a thermal printer, ribbons break in the printer from time to time. This is normal. Don't throw the ribbon in the trash when this happen, just use scotch tape to tape the end of the ribbon to the second roll (tape it on the correct side), turn the roll a few times so that you don't see the scotch tape and close the cover. The printer will sync the ribbon and you can continue printing your ID cards.
If your ribbon breaks too often, check the temperature of your print head in your computer/printer properties. Maybe it is set too high and cuts the ribbon with the heat of the print head.
This is a very important step to do after every 500 cards, or after changing two ribbons. By doing a printer cleanup, you help keep your warranty on the printer, an even ID card print quality and you extend the life of your print head. Thermal printers create residue from the ribbon that sticks on the print head and can drastically lower the print quality of your cards. This residue also goes onto the rollers that move the card inside the printer. Cleaning the printer properly will clean all those parts.
A printer cleanup usually involves three steps. Before you start cleaning, you need to remove all the cards from the feeder and remove the ribbons.
We can't explain in this post exactly how to clean your printer, because every printer is different. See your user guide about how to proceed. But it's important to understand how to do it!
Take good care of your printer and it will last for a long time. We have an Evolis printer here at the office for 12 years now, and it is still working very well! Getting a Photo ID system is a good investment; just make sure it will work for you for many years to come!
Now you need an ID card software, maybe you already have one, maybe not. On the market, you can find cardPresso, Asure ID, CardStudio, EPI Suite and a few others. In the end all ID card software are the same. You will get your card printed, no matter what software you use. Now, as with any software, you must look for the features you need and not pay for something you won't use.
The new trend as we all know is Cloud Application or SaaS (“Software as a Service”), right now there is only a few cloud-based card software like (IDpack in the Cloud, Cloud Badging, Cards Online and CardExchange Cloud). We highly recommend IDpack is the Cloud as it is the best solution for designing, managing and printing plastic ID cards online. In 20 years in the industry I saw thousands of ID cards created by our customers and most of them were very simple, not secure at all and used only a fraction of the feature a Plastic ID card can do. A major advantage of IDpack in the Cloud is its templates, secured database and fields definition engine. You don't need to create your own design, just choose a template and customize it to your needs. You can test IDpack in the Cloud for 30 days with full access for free. No credit card needed.
If you need a Windows or Macintosh software, we recommend cardPresso, as it is the only card software supporting both Windows and Macintosh with tons of features and encoding functions that a cloud-based solution can't do so far. cardPresso ID card software is a great tool for your ID card production in a user-friendly way, designed to have the best performance with large databases with and without photos. cardPresso facilitates all type of tasks related to card production such as the design, print and encode of ID cards.
Tagged on: id card, first time, id card ribbon, cr80